First Layer pink PETG is a 1.75 mm strand for printing models on FDM 3D printers. The spool holds 1 kg, which is 320–330 m of filament, and density is 1.29–1.4 g/cm³. With both weight and length known, your slicer's material profile is easy to check against reality.
Specifications
| Feature | Details |
|---|---|
| Color | Pink |
| Filament length | 320–330 m |
| Weight | 1 kg |
| Diameter | 1.75 mm |
| Density | 1.29–1.4 g/cm³ |
| Material | PETG |
| Technology | FDM |
| Supply | Spool |
| Brand | First Layer |
What you get
- Profile control — 1 kg weight and 320–330 m length to cross-check slicer estimates.
- Pink models straight from the printer — the colour is in the PETG itself.
- A 1.75 mm strand — for FDM 3D printing.
- Density of 1.29–1.4 g/cm³ — the value for your material profile.
- A kilogram of PETG — stock for a series of models.
Who it suits
Anyone printing models on an FDM machine with 1.75 mm strand who tunes material profiles carefully, and anyone who needs pink PETG for coloured models without painting.
Who should look elsewhere
Owners of printers built for a different filament diameter, and anyone for whom winding type, cross-section or recommended temperatures matter: the supplier does not provide them.
Uses and compatibility
3D printing of models on FDM printers. Compatibility with specific printers is not stated; to choose, simply check the 1.75 mm diameter and FDM technology.
What is in the box
A spool of pink PETG filament.
Questions and answers
How can I check my slicer profile with this data?
Set a 1.75 mm diameter and a density from the 1.29–1.4 g/cm³ range, then see what length the software calculates for 1 kg. If it differs noticeably from 320–330 m, refine the profile settings.
How much filament is on the spool?
1 kg of PETG, which equals 320–330 m.
What is the filament intended for?
3D printing of models on FDM printers.
What about print temperatures?
The supplier does not list them. Find the right settings on a small test model.
Reviews
There are no reviews yet.